Waterproofing and surfacing solutions for healthcare facilities
A hospital or other healthcare building cannot close for repair or maintenance, it must remain open to provide ongoing care for its patients. Creating and maintaining a safe and healthy environment for staff and patients alike is critical now and for a facility’s long-term future.
Triflex waterproofing and surfacing technology has helped create and maintain a healthy atmosphere for a number of healthcare establishments. It is solvent free, low odour and can be safely applied without the need for hot works while patients and staff remain in the building. For public buildings you can also be assured that our systems meet the requirements of level 2 BIM and have a long term meaningful warranty to ensure that the building remains waterproof and safe for the long term.
Don’t make the mistake of opting for a cheaper solution, it will cost you dear - your premises could suffer from water ingress or condensation that is unhealthy for both patients and staff and affect the integrity of the building. Let us help you get it right.
Advantages at a glance
Free technical support
No hot works
Tough and durable
All year round application
Available in a wide range of colours and finishes
Solvent and isocyanate free
Meets level 2 BIM requirements
Safe year-round application
Healthcare facilities cannot shut down their facilities when every day of closure would seriously impinge on patient care.
Unlike traditional hot applied systems, such as asphalt, Triflex cold applied waterproofing and surfacing systems can be installed at any time of year. They are totally safe, do not use solvents, have low odour variants and pose no fire risk. It means that new build properties can open faster and those in need of refurbishment can stay open while the work is done.
The curing process typically takes about 45 minutes regardless of the external temperature and can be walked on after just an hour. Minimal pre-works are required and the waterproofing and surfacing system can be patched or applied straight over the top of the existing solution. There is no need for skips and nothing to take to landfill.
Whether it’s roof waterproofing, walkway coating or car park surfacing, we can supply a solution that causes minimum disruption to you, the staff and patients.
Getting your waterproofing specification right
Our job is to make sure that you get the right solution over the long term. Our cold applied waterproofing and surfacing systems are based on extensive research and development, but helping you get the right answer is about far more than this.
From day one of your project we will work with you to get the specification that meets your needs. This involves:
- Consultation. We will listen and work with you towards a solution right from the first enquiry
- Survey. Our technical team will carry out a thorough on-site condition survey
- Testing. If needed we will conduct core, adhesion, cohesive strength and other testing
- Specification proposal. After evaluating your project, we will provide you with a comprehensive bespoke specification
- Installation. We only work with our network of trained Authorised Installers to ensure a quality installation and we can provide on-site support and quality control
- Warranty. Our solutions are underpinned by meaningful warranties backed by insurance

Waterproofing and surfacing solutions for all applications
Our waterproofing and surfacing systems are designed for all structures and applications including roofs, carparks, walkways, terraces, balconies, stairs, stairwells and access ramps. They are functional, durable, slip resistant and aesthetic.
Roofing solutions
For long term protection of new build and as a rapid, effective answer for repair and refurbishment, our roof and waterproofing systems provide the highest levels of certified protection.
Roofs on healthcare buildings are not only subjected to the weather all year round but host a vast number of services such as air conditioning units, cabling and ducting, plant equipment and PV panels. Supplying a waterproofing solution that can seal around even the smallest detail and be strong enough to take the regular foot traffic of maintenance teams for all these services is no mean task. And to help keep maintenance personnel safe rooftop service walkways can be introduced in contrasting colours with an anti-skid finish.
Our solutions are easy to apply using a roller or brush - so they really come into their own when waterproofing around complicated structures. Better still they are solvent and isocyanate free, have a low odour and are completely safe to apply, allowing patients and staff to remain in the building during refurbishment or repair.
Once they are applied they only take 45 minutes to cure and can be walked upon with an hour. They provide a durable, puncture proof and long-lasting solution to even the most complex of jobs.

Car park solutions
Car parks are subjected to high loads from vehicles and exposed to weathering, wear, mechanical damage and chemical attack. Over time this can lead to structural damage and failure. Owners or operators have a legal duty of care for the integrity and safety of the structure at all times.
At the same time a car park is generally the first impression that visitors or even patients to the hospital have, and first impressions count. It needs to look good, providing a safe and secure impression but also have good skid and slip resistance with clear markings and signage.
By providing a wide range of high quality materials, design assistance and colours, Triflex can meet all of these requirements. Our heavy duty, waterproofing, surfacing and protection car park systems provide long term structural protection that maintains its appearance and skid resistance over time. Using our systems can help to minimise accidents and improve a user’s safety and navigation.
Walkway solutions
In the healthcare environment, you often need to get from A to B quickly but safely. Walkways, ramps and stairways need to be safe, slip resistant and clearly marked.
Triflex offers a wide range of cold liquid applied waterproofing and surfacing systems in a wide range of colours, textures and designs. You can also be safe in the knowledge that these fast curing systems are based on the most advanced polymer chemistry, providing long term safety and protection.
In summary, we can provide a walkway surfacing and protection solution that is ready to walk on within an hour. It will offer healthcare visitors, patients and staff a clear and safe journey.

Helipad solutions
Triflex waterproofing surfacing and protection systems are proven in some of the toughest environments. As specialists in advanced resin technologies our highly wear resistant helipad systems can withstand both the mechanical forces and the elements.
Triflex cold applied liquid solutions are rapidly installed, meaning less disruption to vital services from hospitals to airports. The liquid applied resin systems quickly cure to form a robust, anti-skid surface and waterproof membrane even in winter temperatures for year-round project delivery.
Triflex systems are compatible with a range of substrates allowing existing surfaces to be overlaid reducing time, waste and project costs. Whether you have a concrete, asphalt or resin coated helipad, our liquid coating systems can provide outstanding waterproofing and long-term protection to the helipad and structure beneath.

Project support
Triflex have delivered many successful roof, walkway, terrace and car park waterproofing, protection and marking projects, to stadiums and event facilities over the last 40 years.
Our aim at Triflex is to make your project as simple as possible, and our package of completely free of charge services offer total peace of mind. Our Technical Team can undertake a free, no obligation condition survey and provide a bespoke project specification with recommendations and costings all in accordance to help with any funding application.
To find out more, simply get in touch.

