Exposed, rooftop car park decks and ramps directly above occupied spaces are essentially highly trafficked roofs and it is therefore vital that they are fully waterproofed to protect the structure and contents below. For new build and other structures, particularly those with significant levels of structural movement and cracking the priority may be more to protect the structure from the damaging ingress of chlorides and other environmental influences. Whatever the requirement, if left untreated or with insufficient protection, water ingress and other corrosive elements can result in damage to the building fabric and contents.
Engineered to offer long term protection, even in the toughest of circumstances, the BBA and EN 1504-2 certified Triflex ProPark not only prolongs building life but also answers all of your waterproofing, surfacing, safety, aesthetic and design needs. The heavy duty, dynamic crack bridging system is certified to the highest standards, and with a proven track record in the UK and across Europe, ensures long term security and peace of mind.
Dynamic crack bridging, fully reinforced, cold applied system
Triflex are the car park waterproofing and surfacing experts. Featuring unique resins with enhanced elastomeric properties in combination with high tensile strength reinforcement, we deliver a totally waterproof solution designed specifically to accommodate the movement and cracking within parking structures. There is no risk from hot works during application as all of our materials are installed in a completely cold applied form, quickly curing to create a solution that lasts.
Tough and durable protection
The demands of even the highest trafficked, highest space change rate car parks are no issue for the highly traffic, impact and load resistant wearing layer and durable surface finish used in the Triflex ProPark system. The system is unaffected by ponding water and is resistant to chlorides (road salts), carbon dioxide ingress, petrol, diesel, brake fluid, engine oil, battery acid, and de-icing and cleaning products. Protection that's built to last, with a low lifecycle cost.
Historically many car parks have been protected with traditional asphalt coverings which over time will fail. With more than 30 years’ experience of directly overlaying in excess of 1.5 million m² of failed asphalt car parks, Triflex are the industry experts and Triflex ProPark is the industry leading solution for asphalt car parks over occupied premises. In fact, whatever the substrate, Triflex can provide an overlay solution that performs and lasts.
Tried and Tested
Triflex ProPark offers a complete waterproofing and surfacing solution for refurbishment and new-build projects that will last for years to come. The Triflex ProPark system is not only certified and tested to the highest UK and European standards, but has an outstanding track record based on the use of our reinforced waterproofing technology for car parks for more than 30 years in projects across the globe.
Exceptionally fast curing, Triflex enables car parks to remain open during installation, limiting access restrictions and unnecessary disruptions. Installation can be carried out all year round and the system still cures quickly at temperatures down to 0°C. Ramps and critical areas can be completed overnight and opened the next morning.
The system offers high levels of long-term skid resistance in wet and dry conditions, providing a secure and safe solution for both vehicles and pedestrians.
Safety and environmental
Our solvent and isocyanate free resin technology has been assessed under BREEAM principles and can contribute to A+ ratings. To minimise environmental impact the majority of the resin components are also supplied in recyclable bulk containers. The system is compatible with virtually all substrates allowing the existing failed or failing membrane (including asphalt) to be directly overlaid instead of being removed, significantly reducing waste, time, cost and impacts on landfill.
Available in a wide range of standard and bespoke colours and finishes, Triflex ProPark gives you the ultimate choice in car park design
- External car park decks and ramps over occupied premises
- High risk car park decks and ramps subject to significant levels of structural movement and cracking
- New build car park decks and ramps featuring pre-cast construction
- New build
- Overlay of existing failed waterproofing systems
- Overlay of insulated (warm) constructions
- Concrete, concrete repair materials and screeds
- Asphalt and polymer modified asphalt
- Existing membranes
- Structural plastics
- Cast in situ concrete
- Permanent formwork with in situ concrete
- Precast concrete planks with or without structural topping
- Precast double tee units with or without structural topping
- Temporary / demountable (steel / galvanised steel / structural plastic / timber) constructions
- Insulated / warm deck build-ups
Triflex ProPark is available in a range of finish colours allowing the system to be tailored to meet aesthetic and project needs with special colours being produced to order.
For full details on the range of colours and finish options download the Triflex ProPark colour card below.
Triflex ProPark is also the ideal solution to waterproof and surface external car park ramps over occupied premises and high risk ramps subject to significant structural movement and cracking. The heavy duty, dynamic crack bridging system is certified to the highest standards, and with a proven track record in the UK and across Europe, ensures long term security and peace of mind.
Require an on-site survey or quote?
All installations are carried out by our network of Triflex Authorised Contracting Partners. If you have a project we can provide a free no obligation on-site survey and can put you in touch with local Triflex contractors in your area that will be able to provide you with a quote.
Fully certified to the highest UK and European standards and classifications, including:
BBA certified - Certificate 13/5051 Product sheet 2
- Durability: Under normal service conditions the system will have a service life of at least 15 years
EN 1504-2 certified (full system)
- B4.2 (-20°C) dynamic crack bridging
ETAG 005 certified (reinforced waterproofing membrane)
- 25 year expected working life
Root and rhizome resistant (reinforced waterproofing membrane)
- FLL Certified: Root and rhizome resistant
- EN 13501-1
- EN 13501-5: Class BROOF (t4)
- BS 476-3 (EXT.F.AA)
- ISO 9001: Quality Management
- ISO 14001: Environmental Management
- ISO 50001: Energy Management