Triflex Friction Plastic technical details

Technical details

Triflex Friction Plastic

Triflex Friction Plastic is an anti-skid coating and marking system used primarily to add a heavy duty, coloured, surfacing finish.

  • PTV approx. 79 (TRRL rubber / Slider 55)
  • PTV approx. 66 (Four S rubber / Slider 96)

System build-up

Thumbnail
1

Primers

Cryl Primer 222

Triflex Cryl Primer 222

Primer for asphalt, bitumen, timber and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Product data sheet

Metal Primer

Metal Primers

Primer for metal substrates, also available as spray can.

Overcoat / traffic:
60 minutes using spray can
60 minutes using roller

Consumption
Minimum 0.08 to 0.15 L/m²
Product data sheet

Cryl Primer 287

Product Cryl Primer 287 10 kg

Primer for cementitious and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Product data sheet

Than Primer L 1K

Than Primer L 1 K

Single component primer for concrete and cementitous substrates prior to installation of Triflex marking systems.

Drying time: 20 - 30 minutes approx.
Consumption: 0.20Kg/m² minimum.

Product data sheet
2

Marking

Friction Plastic (Reibeplastik)

Anti-skid coating and marking system.

Curing time: 15 - 20 minutes approx.
Consumption: 4.00Kg/m²

Friction-Plastic-Colour

Colours

Triflex Friction Plastic is available in a wide range of standard resin colours, allowing the system to be tailored to meet aesthetic and project needs with special colours being produced to order. For full details see the Triflex Friction Plastic colour card below.

Looking for support?

If you require any support, have an upcoming project or just a general enquiry then please don't hesitate to get in touch, we're with you every step of the way.