Triflex Roll Plastic is a cold liquid applied, exceptionally fast curing, coloured, anti-skid coating and marking system. The system can be used to add a coloured, anti-skid surfacing finish to external car parking areas, recreational areas, walkways and cycle lanes as well for roller applied line markings on car parks. The 2 component system is easy to apply and contains no solvents or isocyanates. Being totally cold applied, no hot works are required throughout the installation removing health and safety risks usually associated with hot applied thermoplastic and other solutions.
Triflex Roll Plastic is based on the most advanced PMMA resin technology and is compatible with a wide range of substrates. It rapidly cures even at very low temperatures making it the ideal solution all year round for shopping centres, retail parks, airports, offices, recreational areas and cycle lanes, which require a solution that can be installed quickly with minimal disruption.
Maximum colour and design possibilities
Create a design to meet your safety and aesthetic requirements with a wide range of standard colours - refer to Triflex Roll Plastic Colour card.
Totally cold applied
There is no risk from hot works during installation as all Triflex materials are applied in a totally cold liquid form, curing to create a tough, durable solution that lasts.
High levels of anti-skid
The high level of skid resistance makes this product the ideal solution for pedestrian walkways, footpaths and cycle lanes.
Single process application
Installation time and costs are significantly reduced when compared to multicoat and broadcast systems.
Ultra rapid curing
Triflex PMMA products are exceptionally fast curing and enable areas to remain open during installation, limiting access restrictions and unnecessary disruptions. Installation can be carried out all year round and the system still cures quickly at temperatures down to 0°C.
Tough and durable
Triflex Roll Plastic is tough and durable, is unaffected by ponding water and is resistant to road salts, petrol, diesel, brake fluid, engine oil, battery acid, de-icing and approved cleaning products.
Triflex Roll Plastic is weather, UV and IR resistant and will not break down when exposed for the long term to direct sunlight.
Triflex Roll Plastic does not contain solvents or isocyanates and poses no fire risk during installation.
- Parking bay coatings
- Parking bay lines
- Car park walkways
- Parent and toddler bay coating
- Disabled bay coating
- Drop off areas
- Ghost aisles
- Blacking out (covering existing markings)
- Trolley coral coating
- Parking zone coating
- Corporate branding / logos
- Rail platform markings
- Bridge and other walkways
- Cycle lanes / ways / routes
- Asphalt including Hot Rolled Asphalt (HRA) and Stone Mastic Asphalt (SMA)
- Tarmac / Tarmacadam / Macadam
- Fresh asphalt including HRA and SRA
- Fresh Tarmac / Tarmacadam / Macadam
- Existing markings
- Pavers / brick paviours
- Coatings (e.g. polyurethane, polyurea, polymethyl methacrylate, epoxy)
Require an on-site survey or quote?
All installations are carried out by our network of Triflex Authorised Contracting Partners. If you have a project we can provide a free no obligation on-site survey and can put you in touch with local Triflex contractors in your area that will be able to provide you with a quote.
- ISO 9001: Quality Management
- ISO 14001: Environmental Management
- ISO 50001: Energy Management